Printer Test Image – Free Download!

with No Comments

This page is a collection of printer test pages and printer test images, including a printer color test image and a print test page black and white.

There are many more printer evaluation images images freely available on the web, but these are a selection of the best available.

Print any one or all of them, then use the accompanying notes to determine if your printer is properly calibrated.


Color Printer Test Page

This color printer test page is based on images created by Bill Atkinson and a freeware image from Photodisc (which is available separately below).

As with any picture to test your printer, you need to know what each part of the image is testing, for the printer test page to be of any use.

I would look for:

Printer test image
  • A smooth transition from black to gray to white in the gray ramp.
printer test image
  • As the gray squares have a more distinct tonal value, you can much more easily see any tonal shifts away from pure gray.
Printer Test Image
  • You can determine your printers white point and black point from the bottom row. Note that the white point on the far right accounts for printers that add a Chroma Optimizer.
Printer test image
  • The gamut ramps show up any banding as well as any issues with color accuracy – you should check that the red, green and blue is actually that. Most printers show some banding, so this isn’t a problem unless severe, or there is an inversion, where brightness shows variable levels as the color gets more saturated.
RGB test image
  • The RGB test image should show good separation between the colors, with no bleeding into adjacent squares.
print test image
  • The four people are useful for checking skin tones. This should be very obvious to you if it is incorrect. In particular, watch out for the skin tones going too yellow / green or blue.
Printer test image
  • The image of the rock arch actually has a slightly cyan sky. This is very useful for checking color shifts, but make sure to always check it against your calibrated monitor.
test image
  • The trees show a lot of fine detail, in addition to giving a burst of bright yellow.
Print test images
  • The electronics are useful for shadow detail. The black square in the top-right helps you set a black point if you are using a colorimeter.
Print test page
  • The strawberries help you see if the reds are printing properly. It’s always easier to see this with a real object, as you can quickly tell whether the strawberries look edible or not!
print test page
  • The high saturation of this sunset image may cause some banding on your print. This is very useful to see the real world banding experience.
print test image
  • The rock has plenty of shadow detail, and a bronze highlight. Cheaper printers often display this bronze color as more green or yellow.
Print test image
  • This black and white image displays a full gradation of tones from white to black, betting showing you how this is handled on a real image.

Color Print Test Image

This printer color test image is from Photodisc, now owned by Getty, and was released under a freeware licence, so you are free to use this as you wish.

This is an excellent printer calibration test image because it really covers every real-world situation you might find yourself printing, and can be used as both a laser printer test image and an inkjet printer test image.

It helps to know what each part of the image is testing. You can use the explanation below to help you understand this:

  • Middle Section
    • The yellows in the sunflower should be bright and distinct from the yellow of the lemon below it.
    • The vase holding the sunflower should have good saturated blues.
    • The shadow areas of the fruit should display correctly, with no problem tones.
    • The cactus and the sunflower leaves should show a rich range of greens.
    • The binocular case has deep brown tones that transition well into the darker areas.
    • The robot has bright, saturated colors that still show detail, as do the colored beads.
    • The elephant shows good detail in the colored saddle, with no bleeding from the blacks.
    • The optically brightened golf balls should have cool blue highlights.
    • The purple tapestry and the sand in the fish bowl should have deep purple tones with plenty of detail.
  • Right Hand Side
    • There is a smooth gray transition in the gray ramp, with no banding or breaks.
  • Bottom – Faces
    • Skin tone in both the highlighted and shadow areas should look natural, especially the difficult pink skin tones in the second face, and the areas where the skin transitions into the hair on the third face.
    • Dark areas in the hair of the first model should show detail without going to pure black.
  • Overall
    • There should be a good range of varying warm highlights in most areas.
    • Pay attention that the tint of the shadows in each box is subtly affected by the contents of each box.
    • Colors all match what you see on your monitor (assuming you have a color calibrated monitor).

Fuji Printer Color Test Chart

The below image was produced by Fuji for calibrating their printers, although it does have issues with the color space – look at the color of the sky for example and you will see that it is more purple than blue.

Nonetheless, this image is included for completeness, but should not be relied upon on it’s own. Although it is not as useful as a printer color test chart, it can be useful for checking monitor calibration however.


Printer Resolution Test

It’s important to run a printer resolution test to determine how good your printer is at picking out individual details.

The following printer test image PDF is courtesy of cream.sourceforge.net.

This can be downloaded as a PDF, or as a full size jpg.


Black and White Test Print

If you’re looking to print a test page in black and white, then there are several excellent resources to help you.

black and white test print

Keith Cooper at Northlight Images has several images, including the one on the right.

Norman Koren also has a number of excellent black and white test charts, such as this one.


Read More:

What’s the best photo printer?

What’s the best printer for cardstock?

What’s the best printer for canvas?

What’s the best photo paper?

Follow Tim Daniels:

Hi, I'm Tim Daniels, photographer and photo trainer, founder of Lapse of the Shutter and creator of the totally free Lightroom Develop System. I've travelled to (probably) 30 countries over the last few years, taking photos and licensing them around the world, and creating lots of free photography learning resources. Read More ...

Leave a Reply